3D-Mini-You

From: $169.00

Your photo-realistic 3D-replica, printed in full colour in various sizes ranging from 5 cm to 21 cm high (custom available sizes on request!). Choose from two material options – Sandstone or Nylon (see material information below for more details).

  • Clear

Quantity:

Product Description

Mini-You Print Production – Some good-to-know information about our awesome technology!

Material Information:

Each lifelike 3D-printed Mini-You is a uniquely manufactured product and made of a variety of 3D print materials – see material information below. You may notice slight colour deviations between the model in your 3D-viewer (computer monitor) and the final print product. These occur due to the chosen print manufacturing process, that is each subject to technical constraints. Depending on the scale, there will be differences in the level of details visible, i.e. the larger the prints the more details can be printed.

Material 1 – Colour Jet Printing (Powder)/ Sandstone

The composite material full-colour prints (CJP – Colour Jet Printing) leave the printer fully coloured, using a fine powdered composite material that resembles sandstone. The print itself is carried out layer by layer and the sandstone material is painted and adhered during the process. We are using modern 3D Systems ProJet Pro printer technology and we print based on the CMYK colour spectrum (390,000 distinct colours) to a resolution of 600×540 dpi. The maximum build size of the parts is 254×381×203 mm and the layer thickness is between 0.089 – 0.102 mm.

Sandstone is a brittle material with a rough surface that must be handled with care. Exposure to water may cause fading, however, our protective, matt coating will provide some resistance to water, moisture and UV-rays. Ideally you keep the figurine away from direct exposure to sunlight (e.g. avoid placing by the window).

This options is the most cost-effective full-colour print solution and great when working under tight project budgets.

Material 2 – MJF Nylon / Full-colour PA12

Using the HP Jet Fusion 580 3D-printer we print thermoplastic in full-colour utilising Multi Jet Fusion (MJF) technology, which deploys two perpendicular carriages to transform powdered plastic (PA12, aka nylon) into solid parts.
Colour permeation is 100% through parts, so if you cut them in half, you see a consistent colour throughout. This is achieved using up to eight chemical agents at a time, with these agents also controlling texture, density and translucency.
The Jet Fusion 580 also has manual voxel control, which enables us to control the physical properties of each voxel – or individual bits of powder – for enhanced control over part strength, appearance, and feature detail. The build volume is a generous 332 x 190 x 248 mm (13.1 x 7.5 x 9.8 inches).

This technology offer the finest details and strength of all currently available 3D-print methods as well as a wall thickness of up to 0,4 mm. Compared to CJP, MJF offers better mechanical properties, chemical resistance, smoother surface and finer colour texture details.

Safety & Health instructions:

The figurines are unsuitable for playing and should be kept out of reach of small children.
Do not lick, swallow or eat parts of the figure as it may cause health issues including but not limited to suffocation and poisoning.
If the figure breaks and/or shatters please be aware that it could have sharp edges that may cause injuries when touched. Please dispose of the figure properly in this case.
As this product contains flammable material please keep it away from heat or fire.

Product care instructions:

Keep out of direct sunlight for extended periods of time to prevent colours from fading.
Keep away from water and humid conditions as this may damage the surface of the figure and causes the colours to fade as well. Only clean with a dry soft cloth.

Additional information

  • 0.8 kg
  • 24 × 8 × 8 cm
  • Size SS – 10 cm, Size XS – 5.6 cm, Size S – 12 cm, Size M2 – 16 cm, Size L – 21 cm

  • CJP_sandstone, Nylon_MJF

Reviews

There are no reviews yet.

Be the first to review “3D-Mini-You”